Location:  Home » Products » Omron Automation Series » Omron HMI series
 
Omron HMI-NS Series

NS Series

Programmable Terminals

NS Series

Even Simpler Equipment Operation with Outstanding Synergy.

International Standards


  • The standards are availabled as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
  • Contact your OMRON representative for further details and applicable conditions for these standards.

Programmable Terminals

Product 
name
Specifications Model Standards
Effective display 
area
Number 
of dots
Ethernet Case color
NS5-V2 *1 5.7-inch *2 
TFT color 
LED backlight
320 × 
240 dots
No Ivory NS5-SQ10-V2 UC1, CE, N, 
L, UL Type4
Black NS5-SQ10B-V2
Yes Ivory NS5-SQ11-V2
Black NS5-SQ11B-V2
5.7-inch *2 
High-luminance 
TFT color 
LED backlight
No Ivory NS5-TQ10-V2
Black NS5-TQ10B-V2
Yes Ivory NS5-TQ11-V2
Black NS5-TQ11B-V2
NS8-V2 8.4-inch *2 
TFT 
LED backlight
640 × 
480 dots
No Ivory NS8-TV00-V2 UC1, CE, N, 
L
Black NS8-TV00B-V2
Yes Ivory NS8-TV01-V2
Black NS8-TV01B-V2
NS10-V2 10.4-inch *2 
TFT 
LED backlight
640 × 
480 dots
No Ivory NS10-TV00-V2 UC1, CE, N, 
L, UL Type4
Black NS10-TV00B-V2
Yes Ivory NS10-TV01-V2
Black NS10-TV01B-V2
NS12-V2 12.1-inch *2 
TFT 
LED backlight
800 × 
600 dots
No Ivory NS12-TS00-V2
Black NS12-TS00B-V2
Yes Ivory NS12-TS01-V2
Black NS12-TS01B-V2
NS15-V2 15-inch 
TFT
1,024 × 
768 dots
Yes Silver NS15-TX01S-V2
Black NS15-TX01B-V2
NSH5-V2 *1 
Hand-held
5.7-inch 
TFT
320 × 
240 dots
No Black (Emergency 
stop button: Red)
NSH5-SQR10B-V2 UC, CE
Black 
(Stop button: Gray)
NSH5-SQG10B-V2



*1. As of July 2008, the image memory has been increased to 60 MB. 
*2. Lot No. 15Z0 or later of NS5 color-type models, Lot No. 28X1 or later of NS8 models, Lot No. 11Y1 or later of NS10 
       models, Lot No. 14Z1 or later of NS12 models, Lot No. 31114K or later of NS15 models.


NS-Runtime


Product name Specifications Media Model Standards
NS-Runtime NS-Runtime Installer, PDF manual, hardware key * 1 license CD NS-NSRCL1 ---
3 licenses NS-NSRCL3
10 licenses NS-NSRCL10


Note: A hardware key (USB dongle) is required for NS-Runtime operation.

System Requirements


Item Specifications
OS Windows XP (Service Pack 3 or higher), Vista, 7 or 8 (Support 64-bit version for Windows 7 and Windows 8.)
CPU Celeron, 1.3 GHz or higher (Recommended)
Memory 
size
HDD: 50 MB min., RAM: 512 MB min. (Windows 7: 1 GB min.). 
50 MB is required for the Runtime alone. (An additional 280 MB is required if CX-Server is not already 
installed.)


Software

How to Select Required Support Software for Your Controller

The required Support Software depends on the Controller to connect. Please check the following table when purchasing the Support Software.


Item Omron PLC System Omron Machine Automation Controller System
Controller CS, CJ, CP, and other series NJ-series
Programmable Terminals NS-series NS-series with an Ethernet port
Software FA Integrated Tool Package CX-One Automation Software Sysmac Studio


FA Integrated Tool Package CX-One


Product 
name
Specifications Model Stand- 
ards
Number of 
licenses
Media
FA Integrated 
Tool Package 
CX-One 
Ver.4.[]
The CX-One is a comprehensive software 
package that integrates Support Software for 
OMRON PLCs and components. 
CX-One runs on the following OS. 
Windows XP (Service Pack 3 or higher, 32-bit 
version) /Vista (32-bit/64-bit version) /7 (32- 
bit/64-bit version) /8 (32-bit/64-bit version) 
CX-One Version 4.[] includes CX-Designer 
Ver.3.[]. 
For details, refer to the CX-One catalog (Cat. 
No. R134)
license 
*1
DVD 
*2
CXONE-AL01D-V4 ---


*1. Multi licenses are available for the CX-One (3, 10, 30, or 50 licenses). 
*2. The CX-One is also available on CD (CXONE-AL[][]C-V4).

Automation Software Sysmac Studio

Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licenses does not include any DVD.


Product 
name
Specifications Model Stand- 
ards
Number 
of 
licenses
Media
Sysmac 
Studio 
Standard 
Edition 
Ver.1.[]
The Sysmac Studio provides an integrated development 
environment to set up, program, debug, and maintain 
NJ-series Controllers and other Machine Automation 
Controllers, as well as EtherCAT slaves. 
Sysmac Studio runs on the following OS. 
Windows XP (Service Pack 3 or higher, 32-bit version)/ 
Vista (32-bit version)/7 (32-bit/64-bit version)/ 
8 (32-bit/64-bit version) 
The Sysmac Studio Standard Edition DVD includes 
Support Software to set up EtherNet/IP Units, 
DeviceNet slaves, Serial Communications Units, and 
Support Software for creating screens on HMIs (CX- 
Designer).

(Media 
only)
DVD SYSMAC-SE200D ---
1 license 
*
--- SYSMAC-SE201L ---



Note: 1. To connect the NJ5 Controller, NS system version 8.5 or higher is required. CX-Designer version 3.3 or higher is 
              also required. 
           2. To connect the NJ3 Controller, NS system version 8.61 or higher is required. CX-Designer version 3.4 or higher 
                is also required. 
* Multi licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).


Cable


Product name Specifications Model Stand- 
ards
Cable 
*1
Screen transfer cable for DOS/V 
(CX-Designer ↔ PT)
Length: 2 m XW2Z-S002 ---
USB-Serial Conversion Cable Length: 0.5 m CS1W-CIF31 N
USB relay cable Length: 1 m NS-USBEXT-1M ---
NSH5 Cables RS-422A cable (loose wires + D-Sub 9-pin) Length: 10 m NSH5-422CW-10M
RS-232C cable (loose wires + D-Sub 9-pin) Length: 3 m NSH5-232CW-3M
RS-232C cable (loose wires + D-Sub 9-pin) Length: 10 m NSH5-232CW-10M
UL-compliant NSH5 
Cable
RS-422A cable (loose wires) Length: 10 m NSH5-422UL-10M CU
RS-232C cable (loose wires + relay cable) Length: 3 m NSH5-232UL-3M
RS-232C cable (loose wires + relay cable) Length: 10 m NSH5-232UL-10M
PT-to-PLC 
Connecting Cable *2
PT connection: 9 pins 
PLC connection: 9 pins
Length: 2 m XW2Z-200T ---
Length: 5 m XW2Z-500T
PT connection: 9 pins 
PLC peripheral port
Length: 2 m XW2Z-200T-2
Length: 5 m XW2Z-500T-2
NSH5 Removable Box 
Cable
RS-232C Cable (connectors) Length: 3 m NSH5-232CN-3M
Length: 10 m NSH5-232CN-10M
NSH5 Removable Box --- NSH5-AL001
NSH5 Wall-mounting 
Bracket
--- NSH5-ATT02
NSH5 Visor --- NSH5-ATT01



*1. Use a standard USB Type A male to Type B type male Cable to connect the NS series PT to a personal computer 
       (CX-Designer). 
       Use a standard USB cable to connect the NS series PT to a PictBridge-compatible printer. USB cable type depends 
       on the printer. 
*2. To connect the NS series PT to NJ series Controller, using a commercially available 10/100-BASE-TX twisted-pair 
       cable. 
       For detail, refer to the NS series SETUP MANUAL (Cat. No.V083).


Options


Product name Specifications Model Stand- 
ards
Video 
Input 
Unit
Inputs: 4 channels 
Signal type: NTSC/PAL
NS-CA001 UC1, CE
Input channels: 2 video channels and 1 RGB channel *1 
Signal type: NTSC/PAL
NS-CA002
Special Cable for the 
Console
Cable length: 2 m F150-VKP (2 m) ---
Cable length: 5 m F150-VKP (5 m)
Controller 
Link 
Interface 
Unit
For Controller Link Communications NS-CLK21 UC1, CE
RS-422A 
Adapter
Transmission distance: 500 m total length 
Note: Use this model when connecting PT models without 
a V[] suffix. 
Note: PT models with the V[] suffix can also be connected.
NS-AL002 ---
Transmission distance: 50 m total length 
Note: 
Only PT models with a suffix of V[] are connectable. 
Use the NS-AL002 to connect models without a V[] suffix.
CJ1W-CIF11 UC1, N, 
L, CE
Sheet/ 
Cover 
*2
Anti-reflection Sheets 
(5 surface sheets)
NS15 NS15-KBA04 ---
NS12/10 NS12-KBA04
NS8 NS7-KBA04
NS5 NT30-KBA04
Protective Covers (5 pack) 
(anti-reflection coating)
NS12/10 NS12-KBA05
NS8 NS7-KBA05
NS5 NT31C-KBA05
Protective Covers (1 cover included) 
(Transparent)
NS15 NS15-KBA05N
Protective Covers (5 covers included) 
(Transparent)
NS12/10 NS12-KBA05N
NS8 NS7-KBA05N
NS5 NT31C-KBA05N
Attachment NT625C/631/631C Series to NS12/10 Series NS12-ATT01
NT625C/631/631C Series to NS12/NS10 Series (Black) NS12-ATT01B
NT610C Series to NS12/10 Series NS12-ATT02
NT620S/620C/600S Series to NS8 Series NS8-ATT01
NT600M/600G/610G/612G Series to NS8 Series NS8-ATT02
Memory 
Card
128 MB HMC-EF183
256 MB HMC-EF283
512 MB HMC-EF583
Memory Card Adapter --- HMC-AP001 CE
Replacement Battery Battery life: 5 years (at 25°C) CJ1W-BAT01 ---
Bar Code Reader CCD handheld bar code reader (RS-232C interface) V520-RH21-6


*1. One screen cannot display two video inputs simultaneously. 
*2. A Chemical-resistant Cover (NT30-KBA01) is available only for the NS5.



ABOUT US | PRODUCTS | SUPPORT | MESSAGE | CONTACT US
COPYRIGHT @ 2014 JAWEE-AUTOMATION.COM